815 Roderick Ave,
Coquitlam BC V3K 1P
In this blog post, we are going to talk to you about why and when you should replace your electrical switches and plug outlets.
Most people take for granted the electrical switches and outlets in their home until one doesn’t work. These simple electrical components such as Electrical Marrettes can quickly become a hazard if not inspected and do eventually fail as a result of constant use or its lifecycle component. We recommend an electrical inspection be performed every 2-5 years by a licensed electrician to verify that your electrical system is safe.
An electrical safety inspection should include the main Electrical Panel, Lighting plus the Switches and Outlets throughout the house.
Without professional training, home or building owners are not trained or licensed to diagnose electrical safety concerns and usually only made aware of an issue when appliances, lights or outlets cease to function.
Our following blog will identify and simplify the most common issues and reasons why you should consider changing or updating your electrical outlets and switches.
Most homes, buildings or facilities require considerable repairs after 20 years. Within 20 years we generally replace the roof shingles, windows, doors, furnace, air-conditioner, flooring, walls, the paint, and the list goes on.
The end of life or lifecycle replacement for a switch or plug outlets is similar, they wear out. The 20 year life-cycle mark is a safe guideline to use when making a decision to make repairs or upgrade your electrical system components.
Lifecycle expectation can be tricky, as the more you use a switch or outlet it may increase or decrease its life-cycle. If the switch or outlet is never used, its end-of-life will be extended, but if there is regular use or abuse, they may need to be replaced much sooner.
If your house or building is 30-50 years old your Electrical plugs and outlets may be a ticking time bomb, waiting to fail. If your property falls in this category we recommend you should plan for an Electrical Inspection, as most of the switches and outlets need to be replaced. Your property may have aluminium wiring and if so it’s critical to have an inspection as soon as possible.
These basic examples are just a few of the issues that indicate immediate repair. Leaving these defective components in place increases electrical safety concerns and real threat of potential fire.
Like most products on the market, there are several levels of quality for electrical switches and outlets ranging from low, medium, to high. Just a word of caution, there is one more category, can you guess what it is? (Junk.)
Word of advice, when purchasing light switches or plug outlets always choose a quality product.
PTX Electric has responded to many service calls at homes and businesses just to replace an inferior plug or switch purchased from anonymous outlet stores. At that moment it seemed like a deal but having to replace it several times is costly. PTX Electric only sells quality components, and we guarantee the products we sell, if it fails, we replace it for free.
A Regular plug outlet will create similar issues if defective. When you plug in a heater or light or appliances, they may work sometimes, then they don’t. Some customers have told us, when they bump the electrical outlet it starts to work again. (Not recommended)
Internal switch and outlet components do wearout and fail and leave the owners questioning what’s happening? Any of the issues described above could indicate a fire threat and should be addressed as soon as possible.
If these conditions exist in your house or facility there is cause for concern and these potential electrical issues should be inspected and repaired as soon as possible.
Do you know the Difference between a GFI and an Arc Fault?
A Ground Fault Interrupter is an electrical safety device designed to quickly break the flow of current when it detects current leakage to the ground. Its function is to protect equipment and people from serious shock.
An Arc Fault Circuit interrupter is a device that detects electrical arcs that are the main signs of a loose connection in-home wiring. A loose connection over time can become hot enough to ignite a house fire.
Do you know where these devices are located and why?
An Arc Fault Breaker is located within the Main Electrical Panel, Arc Fault breakers have a visual test button that can be pushed to test if the breaker is functioning properly.
To test the Arc Fault breaker, press the reset on the face of the breaker and it should flip to the off position, once tested you will need to reset the breaker back to the on position. The plug outlets powered by this breaker are in bedrooms, finished basement areas, and will also feed several other appliances as required by BC code.
GFCI outlets appear similar in shape to any regular plug although it has 2 test buttons on the face, one test and 1 to reset the outlet. To test the operation of GFCI press the test button and an audible click will be heard, the outlet is switched off. To reset the GFCI press the reset button and the device will reset and you will hear a click and see a visual green light appear indicating the powers on.
If any of these issues occur, your GFCI or the circuit is problematic and should be tested and repaired. Remember there is a TEST button on your GFCI (ground fault circuit interrupter) outlet. If you press the button and the outlet doesn’t trip this indicates a problem, for quick service please call PTX Electric.
The potential for serious injury is a potential concern when working with ungrounded electrical components and wiring in homes constructed 30 years plus. If you own an older home or facility a complete electrical inspection is recommended.
If your home or facility electrical system indicates any issues listed above, please give PTX Electric a call and we will keep you safe.
On many occasions, we receive calls from home or building owners and they want to add an extra stove or hot tub, air-conditioning, clothes dryers, pool pumps etc. Most homes and small businesses were designed and built for single-use dwellings and never calculated for major appliance upgrades.
In many cases, a home has only a 60 or 100 amp electrical service and cannot handle added load. We don’t want you to purchase new appliances and find out after the fact you need a new 200 amp electrical panel to handle the load. The cost for a new 200 amp panel is 4,800-7,200 dollars. Call PTX Electric first and we will save you dollars.
If a home or building has undergone several renovations with minimal or no Electrical code inspections, it is a major concern. Several customers we service have had to spend thousands of dollars to complete electrical upgrades to correct load violations and poor workmanship.
When renovating your property installing new outlets or switches here and there doesn’t look good and you are possibly leaving old unsafe receptacles in service. For minimal dollars, all the old switches and outlets should be replaced during a renovation, and you will get the best bang for your dollar spent.
When planning a home or building renovation take your time and include the professionals required to ensure you get what you want. PTX Electric works hand in hand with many Architects, Engineers and General contractors to ensure your dream is brought to life, with minimal errors or omissions.
Developing an equipment and appliance list is essential, it will allow the electrical design to right-size the electrical service. Understanding your present-day needs and future wants helps us to prepare for that future hot tub that you want but can’t afford today. We recommend all switches and outlets be changed when doing a renovation. It gives you 20 years, worry-free.
Let PTX Electric help you plan your electrical requirements for your upcoming renovation. Electrical safety is important and preventative maintenance can prevent unsafe conditions and potential life safety concerns.
With most renovations, it seems to be building design, design, design.
Then, Oh yah, what about the electrical?
We hate being the last guys in because sometimes we have to say, no that won’t work, can’t go there, ahh nope, not enough power.
We can make your project a success let PTX Electric help you plan, from the start to the finish.
It’s a given that a basic facelift will sell your home faster and get the highest dollar result. Replacing all the electrical outlets and switches with our new Décor style products will make your home look modern, fresh and give the purchaser confidence that the electrical system has been inspected and necessary repairs completed.
The cost to replace all the switches, outlets and covers in a 1,200 square foot home runs anywhere from 1,200 to 2,200 dollars, based upon the fixture count. This seems like minimal dollars when you spread it over 20 years.
If you spent 2,200 dollars it works out to (110 dollars a year). It is a small price to pay when it could save your home and maybe your life.
PTX Electric Ltd strongly recommends replacing your outlets and switches is not a DIY project, leave it to a certified electrician to update and correct all your electrical needs. Make a list of all your concerns and we can provide a budget that works for you.
A licensed electrical contractor knows how to properly inspect and test your outlets and switches. They’ll check for signs of electrical damage like cracking, peeling, scorch marks that indicate fixture failure. In addition, we will advise the customer if there is a need for other repairs such as faulty breakers, wiring or if the main distribution panel is at its end of life and needs to be replaced.
We hope we have answered most of your questions in this blog, but if you have additional queries, please feel free to call us at PTX Electric and we will do our best to answer all your questions.